Pump active controller
Adjustment and monitoring of the pump operating conditions
KTM
Vacuum/pressure vane pump
1200 | 1500 | 1800 | 2300
The KTM series is equipped with liquid cooling on the body and flanges, allowing use in vacuum and pressure without time limitations.
Focus points
- Pneumatic actuator
- Vacuum group
- Automatic lubrication pump as standard
- Water cooling on body and flanges
- High wear resistance thanks to high hardness cast iron
- "Long life" blades as standard
- Rotor with steel pins for easier maintenance interventions
- Flanges with sliding slots in case of material ingress or blade breakage
- Cooling pump as standard
- Check valve (rubber ball) integrated into the pump
- Provision for overpressure valve
KTM/PFR
KTM/DFR
KTM/HFR
Manual suction unit
Hydraulic suction unit
Pneumatic suction unit
Adjustable discharge elbow
Ø 120
Battioni Pagani® Vacuum Pump Oil
5 lt
Battioni Pagani® Flushing Fluid
5 lt
Battioni Pagani® Flushing kit
Aluminum air filter
Air/water radiator with thermostat
Cyclone valve
Features
- Operating conditions: pressure = 1.5 bar (22 psi); temperature = -15°c / +80°C
- Body in AISI 304 stainless steel or galvanized steel
- Stainless steel ball ø 200
- Control indicator
- Standard overpressure valve
- Max flow rate 55000 l/min
Painted carbon steel exhaust silencer
Ø 100 | Ø 120
The Battioni Pagani silencer is designed to reduce noise generated by energy pulses at the inlet and outlet of the vacuum pump and must be installed at the discharge line and the suction line. The silencer is designed for air conveyance.
Silencer filter
Pulley with pneumatic clutch
Cod. 6080200041: KTM 1200-1500 - KTS
Cod. 6080200034: BALLAST 16000- KPS 550-670 - WPT
Cod. 6080200035: KTM 1800-2300
Cod. 6080200036: WSM 3300
Cod. 6080200394: AIDA II - AIDA 30000
Cod. 6080200512: BLW 140
Sliding support silencer
Ø 100 | Ø 165 | Ø 200 | Ø 250 | Ø 300 | Ø 350 | Ø 450
Silencer supports, 2 for each unit.
Code 5090000128: Ø 200 KPS 490 - 550 - 670 / BLW 140
Code 5090000129: Ø 250 KPS 490 - 550 - 670 / KTS 1080 / BLW 140
Code 5090000137: Ø 400 (WSM 3300)
Code 5090000138 Ø 165 (MEC 1000 - 1600 / BALLAST 3500 - 4500 - 6000 - 7500)
Code 5090000139 Ø 187 (BALLAST 3500 - 4500 - 6000 - 7500)
let's stay in touch
Subscribe to our NEWSLETTER
Fill out the form below to receive regular tips, news and updates.