BLW | Battioni Pagani

Home • Products • Vacuum trucks •

BLW

Rotary lobe vacuum pump

140 | 185 | 210 | 255 | 270 | 300 | 355 | 400 | 750

BLW is a volumetric lobe pump for air particularly suitable for high vacuum.
The two trilobe rotors rotate inside the body with minimal clearances, synchronized by an oil-fitted phase gear. The non-dragging segment seals ensure maximum efficiency and longevity.

Download technical sheet

Air injection cooling

Oil free

Water free

BLW ATEX pumps are available on request
II 2/2 G Ex h IIB T3 Gb/Gb
II 2/2 D Ex h IIIC T200°C Db/Db

The ultimate rotary lobe vacuum pump

1. Top performance

The BLW line offers an air flow from 800 m3/h up to 4540 m3/h and provides a continuous vacuum of 93%, making the BLW capable of meeting any heavy-duty self-cleaning application.

2. All in one

The BLW integrates five main elements into a single system: a rotary lobe vacuum pump, a 4-way valve for switching between vacuum and pressure, an inlet for air injection and cooling, a check valve, and a non-return valve on the injection flow.

This ultra-compact and ultra-lightweight design offers truck designers maximum flexibility to meet space and weight constraints.

3. Low maintenance costs

The BLW drastically reduces maintenance costs and therefore the environmental impact: no parts subject to wear, no lubrication of the pump chamber, and no water consumption as no water tanks, radiators, and separators are needed.

4. Fresh and quiet

The BLW configuration minimizes heat dissipation and acoustic emissions: this is the result of the design optimization of each element of the system and the overall integrated system that combines such elements.

Focus points

Greasing point on the 4-way valve
Standard non-return valve
Inspection cover
Labyrinth seals with segments and lip seal on the shaft prevent oil leakage
Oversized rotor shafts
Provision for overpressure valve
Continuous operation: air injection cooling system optimized for temperature containment
G1/2'' hole for thermostat
Passage sections designed to minimize pressure losses and heating

BLW/P

BLW/PM

BLW/HC

BLW/H

Hydraulic rotary cylinder

Pneumatic rotary cylinder

ATEX pneumatic rotary cylinder

Synthetic oil PAO ISO VG 220

1 lt

Aluminum air filter kit

ATEX aluminum air filter kit

RPM sensor (only for the HC version)

RPM sensor for precise detection of rotational speed

Sliding support silencer

Ø 100 | Ø 165 | Ø 200 | Ø 250 | Ø 300 | Ø 350 | Ø 450

Silencer supports, 2 for each unit.

Code 5090000128: Ø 200 KPS 490 - 550 - 670 / BLW 140
Code 5090000129: Ø 250 KPS 490 - 550 - 670 / KTS 1080 / BLW 140
Code 5090000137: Ø 400 (WSM 3300)
Code 5090000138 Ø 165 (MEC 1000 - 1600 / BALLAST 3500 - 4500 - 6000 - 7500)
Code 5090000139 Ø 187 (BALLAST 3500 - 4500 - 6000 - 7500)

Explore

Pulley with pneumatic clutch

The Battioni Pagani pulley is a pneumatic clutch assembly with dimensional characteristics and performance particularly suitable for controlling the engagement and disengagement of vacuum pumps, blowers, high-pressure piston water pumps, and centrifuges, installed above the vehicle frame, where the pump and/or blower operation occurs via a belt drive.

The use of clutches on combined vehicles for the emptying of septic tanks and channel washing allows for the engagement and disengagement of vacuum and water pumps without having to stop the rotation of the drive that powers the input pulley, thus ensuring the operator extreme ease of use of the setup and a reduction in passive times.

Explore Download datasheet